C-01 Split Y System (Simple Anchoring System)

The Split ‘Y’ anchoring system is one of the most common anchoring systems which is still widely used because of its cost-effectiveness and availability. SILICON has modified certain of these refractory anchors to help improve its holding power. Different types of corrugations can be pressed into the tines of the anchors to achieve this effect. The Split ‘Y’ system is used for light to very dense refractories.

SYAR is suitable for Rapid Arc Welding. Widths greater than 16 mm have a reduced base. SYM and SYMH are normally corrugated on opened section only. Corrugation of the step section must be requested during inquiry.

Split Y Refractory Anchors - Technical Drawings & Application Example